Skip to main content

SURVIVAL KNIFE MODIFICATION: SCHRADE SCHF 9 RE-HANDLE

 
One of the series of knives released by Schrade (Taylor Brands) in 2015 that has created some stir, mainly due to their low price and choice of blade steel. Probably also due to their quarter inch thick spine. For this SCHF 9, well two more notables: Recurved edge (love it or hate it) and Flat-ground main bevel.
 
The TPE (Thermo Plastic Elastomer) handle is held together by 8 individual  Hex bolts threaded into the tang, though it looked like four bolts only.
 
 
 I noticed that manufacturer who stamped their marks tends to laser them later on their subsequent release. Perhaps to reduce cost? They usually cite material strength issues caused by hard stamps (A stamp applied forcibly on a ricasso may weaken the knife or bend it slightly. Well, for this Schrade, they stamp it where the fuller (blood groove) would have been, so it's not a material-strength compromise we are dealing with here. Looks more like cost issue. Well, at below $40, Schrade had a good reason not to stamp it. I totally dig it.
 My first impression holding the knife in the palm of my hands (I have average sized hands) is that the palm swell feels bulky. The feel is like someone wrapped an extra roll of Wilson racquet tape on a racquet handle which already had some existing tape.
 The hex bolts come in 3 different lengths, to compensate for the uneven TPE handle thickness.
A close-up view of the tapped recess to engage the hex bolts. Now, I have decided to play mountain man. (or Jungle man for SE Asian readers)


Above: some tools and materials I used to rehandle the handle in TEAK. The file handles were shown here to illustrate the finish I intend to achieve with the important looking Da



Above: The blade was cold-blued. The teak handle was peened with 1/8" brass rods.



Above: The laser etch is still visible after the cold-blue was applied.



The primary bevel was given a Kanaban Grind: flat piece of mild steel and some powdered Aluminium oxide mixec with water(crushed powdered carborundum stone, if you will) This produces a hazy steel look, like a laminated Japanese Hunting knife.


After the abortion, the knife felt much better in my hands.


I had a good supply of paracords, but this worn shoelace looked the part more as a lanyard. Also shown is the black Nylon sheath. (This knife does not come with a diamond hone and ferrocerium rod like the SCHF 51 & 52s)

All in all, I thought I made the knife more inviting to use, and more natural to look at. What do you think?

Regards from lion city.

Comments

  1. AnonymousAugust 3, 2023 at 10:50 AM

    Excellant! The original TPE plastic handle needs to go. Pleased to see that the tang is not skelatized like Eafengrow.

    ReplyDelete

Post a Comment

Popular posts from this blog

SHARPENING WITH ARKANSAS STONES

What on earth are they? A user made box of assorted Arkansas stones. They are America's answer to: The Wales' Welsh Slate (Dragon's Tongue); The Scotch Tam O'Shanter; The English Charnley Forest stone; The Japanese Tenin Toishi; The German Thuringian Hone; The Chinese Guangzhou River bedrock; The Belgian Coticule; You get the idea. Local rocks that you use to sharpen mama's kitchen knives.   A collection of smaller pocket-sized Arkansas stones  In this entry, I will not try to tell you what you probably already know. What is the point of describing that oily rock you already have under your bench, in your drawer, in a can of kerosene? Note also, that the sharpening I describe here is best applied to woodworking in general. I am an amateur handtool woodworker. Sharpening a straight razor would be entirely another branch of science. I do not profess to know all there is to know about sharpening or Arkansas stones; I simply failed
20 comments
Read more

An Essential Pocket Knife : The Stockman

You're so right. I should be writing about Whittlers instead of Stockman knives. Afterall, this is a wood working blog. But do you whittle the whole day? Perhaps. Can you peel an apple with a whittler? Maybe, but not as well. What if you forgot the butter knife at a picnic, or you somehow need to spey or neuter an animal in an instant?.. (ok, I'm pulling your leg, but I'm referring to the ubiquitous spey blade in your stockman.) A stockman knife (Also called your Gandpa's EDC) will do all of the above with ease, and it will WHITTLE. My shallow pocket and minute brain says that Whittlers are for collectors. Try buying a Stag handled split-backsping whittler. They are not cheap. This is one of the forty stockmen I've purchased online. The other 39 are on their way. And yes, I have issues. The stockman bug maybe. Wait till my wife sees them: I like to imagine myself as a craftsman first, woodworker second. Now you see why I bought this brand. Looks so
12 comments
Read more

A Case for Chisels: Stanley 5000 series

“Life being very short, and the quiet hours of it few, we ought to waste none of them in reading valueless books.” -John Ruskin. Substitute the word "books" with "blogs", and perhaps you should stop reading. I did my part and you are warned. No, I can't refund 4 minutes of your life. F or the most part of my woodworking life, I've kept my loose chisels in felt lined drawers. (I mean excess chisels purchased on impulse: Those of cast steel, those of boxwood, those octagonal London snobs, those ergo grips that promises an orgasm with each mortise, the socketed, the tanged, the handle-less tangs, the long paring ones, those curious crank-necks, the basic pig stickers, the vintage ferrule-less-...you know. I know. Some folks have too many hammers or smoothing planes or trammels. I'm a chisel guy. But the ones that are constantly on the move live in a canvas tool roll. I like the look of a chisel roll, except that the edges tend to slice the
Post a Comment
Read more